- for KNX S-Mode or KNX PL-Link communication
- for 2-/3-port control ball valves up to DN25
- for 6-port control ball valves up to DN25
- without spring-return
- pre-wired with two 0.9 m connection cables
GDB111.9E/KN KNX Actuator for Ballvalve 5Nm
Giá: Liên hệ
Electromotoric rotary actuator KNX for control ball valves up to DN25
Electromotoric rotary actuator
Operating Mode 1:
- Use of two separate setpoint for heating / cooling where the actuator manages the heating / cooling ranges of the 6-way control ball valve.
Operating Mode 2:
- Setpoint 0…100% position for implementation of the heating / cooling ranges in a supervisory controller.
Operating Mode 1:
- Use of two separate setpoints 0..100% for heating and cooling
Operating Mode 2:
- Use of one setpoint 0..100% for actuator position
Torque : 5 Nm
Angular rotation : 90 °
Power consumption : 3 VA, 2.5 W
Positioning time : 150 s
Communication : KNX S-Mode or KNX PL-Link
Cable length : 0.9 m
Positioning signal : KNX S-Mode or KNX PL-Link
Spring return function : No
Degree of protection : IP54
Ambient temperature, operation : 0…50 °C
Dimensions (W x H x D) : 88 x 112 x 143 mm
Mounting position : Horizontal or vertical
Operating voltage : AC 24 V
Position feedback : KNX S-Mode or KNX PL-Link
Auxiliary switch : 0
TÀI LIỆU & HƯỚNG DẪN SỬ DỤNG
| Tải Xuống |
SẢN PHẨM TƯƠNG TỰ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
